JIM
HELP!!!! CLUTCH PROBLEM
Moderator: Rob Voska
-
JIM VARY
- Posts: 23
- Joined: Tue Apr 07, 2009 12:26 pm
- Vintage Karting items owned: 1958 DAZZLE KART
made by V&W manufacturing - User Agreement: Yes
- Location: South Florida
HELP!!!! CLUTCH PROBLEM
I NEED HELP. I AM BREAKING THE TABS OFF OF THE SHOE DRIVE PLATE ON MAX TORQUE CLUTCHES AND I DONT KNOW WHY. CAN SOMEONE POINT ME IN THE RIGHT DIRECTION AND TELL ME WHAT I MAY BE DOING WRONG? I AM TRYING TO GET READY FOR FREMONT AND I CANT FIGURE OUT WHAT I AM DOING TO CAUSE THE TABS TO BREAK OFF.
JIM
JIM
Re: HELP!!!! CLUTCH PROBLEM
Can you post a picture? Don't quite know what you are talking about.
I weld / fuse the edge of the shoe where it rides on the cross pin.
I weld / fuse the edge of the shoe where it rides on the cross pin.
-
Ernie Fisher
- Posts: 29
- Joined: Mon Aug 13, 2007 11:00 pm
- Vintage Karting items owned: 1958 Hovey Hawk
Konig Power
Re: HELP!!!! CLUTCH PROBLEM
Jim,
Contact Jim Donovan at Max Torque, as he is addressing this problem. Jim is a great guy to work with, and will be all kinds of help to you! Also, Terry Ives might be of some assistance, as he is working with Jim on this problem.
Ernie
Contact Jim Donovan at Max Torque, as he is addressing this problem. Jim is a great guy to work with, and will be all kinds of help to you! Also, Terry Ives might be of some assistance, as he is working with Jim on this problem.
Ernie
-
JIM VARY
- Posts: 23
- Joined: Tue Apr 07, 2009 12:26 pm
- Vintage Karting items owned: 1958 DAZZLE KART
made by V&W manufacturing - User Agreement: Yes
- Location: South Florida
Re: HELP!!!! CLUTCH PROBLEM
Ernie, Rob, Thanks for the help.I just got off the phone with Jim and he told me what the problem was and how I could correct it. He was very helpful. 