Looking to I D, 2 head and an intake adapter plate, any one know what these are?
Thanks,
Mark L./SWNY
Looking to I D some engine parts
Moderator: Rob Voska
-
- Posts: 124
- Joined: Fri May 08, 2009 10:51 pm
- Vintage Karting items owned: ProX 77,McC R1,Bug Stinger Dual.
- User Agreement: Yes
- Location: SWNY14755
-
- Posts: 124
- Joined: Fri May 08, 2009 10:51 pm
- Vintage Karting items owned: ProX 77,McC R1,Bug Stinger Dual.
- User Agreement: Yes
- Location: SWNY14755
Re: Looking to I D some engine parts
Need to I D these parts, anyone up for positive identification.
Re: Looking to I D some engine parts
Reed engineering head is for a Power Products.
Other head hard to tell. Modified to fit on a McCulloch or is it a 100CC BM head?
Other head hard to tell. Modified to fit on a McCulloch or is it a 100CC BM head?
-
- Posts: 124
- Joined: Fri May 08, 2009 10:51 pm
- Vintage Karting items owned: ProX 77,McC R1,Bug Stinger Dual.
- User Agreement: Yes
- Location: SWNY14755
Re: Looking to I D some engine parts
Thank you for your response;
The BM heads use an 8mm stud to mount head, these holes are either ¼” or for 6mm.(.260”)
Also the overall width of this head is 4 & 7/8” diameter, smaller than the BM heads.
The spark plug hole looks like it’s for long reach B9ES or N-2.
Top of the plughole to the deck is 1.300”.
CTC mount holes are 1.313” approx.
Holes do not line up with McCulloch.
Weighs 1-pound 1.55ozs
99 % sure this is kart related due to the location it came from.
Mark
The BM heads use an 8mm stud to mount head, these holes are either ¼” or for 6mm.(.260”)
Also the overall width of this head is 4 & 7/8” diameter, smaller than the BM heads.
The spark plug hole looks like it’s for long reach B9ES or N-2.
Top of the plughole to the deck is 1.300”.
CTC mount holes are 1.313” approx.
Holes do not line up with McCulloch.
Weighs 1-pound 1.55ozs
99 % sure this is kart related due to the location it came from.
Mark
-
- Posts: 124
- Joined: Fri May 08, 2009 10:51 pm
- Vintage Karting items owned: ProX 77,McC R1,Bug Stinger Dual.
- User Agreement: Yes
- Location: SWNY14755
Re: Looking to I D some engine parts
still hoping to I D the head in the top left, hopefully the specs I gave on it will help tell what engine used this.
thanks and Happy New Year.
Regards,
Mark L./SWNY
thanks and Happy New Year.
Regards,
Mark L./SWNY