Are any parts interchangeable between the A400 and the A490?
Thanks for any info.
Clinton A400 vs. A490
Moderator: Rob Voska
-
- Posts: 56
- Joined: Sun Mar 13, 2016 4:21 pm
- Vintage Karting items owned: Simplex Challenger Mk4
- User Agreement: Yes
-
- Posts: 297
- Joined: Sun Aug 12, 2007 9:36 am
- Vintage Karting items owned: 4 Bugs, including the Wasp bought by my Dad in 1959. Many Clintons and a few Macs
- User Agreement: Yes
- Location: Cumming, GA
Re: Clinton A400 vs. A490
- The blocks are different -there is a pocket for the PTO ball bearing on the A490
- Cranks are different - ball bearing press fits on the crank
- Pistons, rods, rings, gaskets, manifold, carb, tank and pretty much everything else is the same for the two
- Cranks are different - ball bearing press fits on the crank
- Pistons, rods, rings, gaskets, manifold, carb, tank and pretty much everything else is the same for the two
-
- Posts: 56
- Joined: Sun Mar 13, 2016 4:21 pm
- Vintage Karting items owned: Simplex Challenger Mk4
- User Agreement: Yes
Re: Clinton A400 vs. A490
Thanks Terry-just putting together an A400 for puttin' around on my Simplex.