WTB West bend small parts
Moderator: Rob Voska
Forum rules
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
-
- Posts: 70
- Joined: Fri Jun 15, 2007 11:09 pm
- Vintage Karting items owned: lots a karts and engines
WTB West bend small parts
I need some of the special bolts and rectangular washers that hold the fan shrouds on the 580 and 700 motors. The bolts are 1/4-20 by 1/2" length and are slotted hex head. Any one have any or know where I can get them? Thanks
Re: WTB West bend small parts
Frank,
Try McMaster Carr for the bolts or search for a place called the 'House of a Million Screws'
R.E.A.R.
Try McMaster Carr for the bolts or search for a place called the 'House of a Million Screws'
R.E.A.R.
-
- Posts: 18
- Joined: Sat Jun 16, 2007 11:21 pm
- Vintage Karting items owned: 18 vintage karts
30 + McCulloch motors
Re: WTB West bend small parts
Hi Frank,
I used hack saw to cut screwdriver slots and then powdercoated them silver. Worked for me.
Paul
I used hack saw to cut screwdriver slots and then powdercoated them silver. Worked for me.
Paul
-
- Posts: 70
- Joined: Fri Jun 15, 2007 11:09 pm
- Vintage Karting items owned: lots a karts and engines
Re: WTB West bend small parts
Thanks, guys. I was wondering what happened to all of the parts that were left over when US Motor sold all of the old 580 parts. Some one had to buy all the stuff.
Re: WTB West bend small parts
Frank,
The square washers can be easily made by hand.
Heard that someone in Kentucky ended up with the old WB stock however I cannot confirm it or have contact info.
R.E.A.R.
The square washers can be easily made by hand.
Heard that someone in Kentucky ended up with the old WB stock however I cannot confirm it or have contact info.
R.E.A.R.