Page 1 of 1

WTB piston/rings for Mac D44/55 saw motors

Posted: Sun Mar 19, 2017 5:43 pm
by Terry Bentley
Looking for one or two piston/ring sets for the early Mac saws D44 or 55. These fit a 2" bore and will measure about 1.995 diameter, but look just like one that fits a Mc 5/6/10. Oversize will work also. If you have something let me know. Thanks

Re: WTB piston/rings for Mac D44/55 saw motors

Posted: Thu Mar 23, 2017 6:56 pm
by Mark Loraine
part numbers 51747 std, 51748=.010" O/S, 51749=.020" O/S and 51750= .030".
2.000 inch standard bore.

Re: WTB piston/rings for Mac D44/55 saw motors

Posted: Fri Mar 24, 2017 2:16 am
by Terry Bentley
Thanks I will keep an eye out for those part numbers.

Re: WTB piston/rings for Mac D44/55 saw motors

Posted: Tue Apr 04, 2017 12:46 am
by david a luciani
terry, sent you email and pm call me i'll get ya going again. dave l