WTB GAS carbs

Moderator: Rob Voska

Forum rules
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
Andy Symons
Posts: 39
Joined: Sun Nov 25, 2007 1:09 pm
Vintage Karting items owned: 1961 A-runner, 63 Dart, 59? Percival, ?? Fantic Broncco, 610/820 WB, Mac92
User Agreement: Yes
Location: PA

Re: WTB GAS carbs

Post by Andy Symons » Wed Feb 08, 2012 1:48 pm

ted johnson wrote:Re: WTB GAS carbs

Post by ted johnson » Wed Feb 08, 2012 11:30 am
Thanks, Stan. I have a pair of 227's coming for the Bonbright 610, and a pair of 307's for the chrome bore 610.
Don't mean to get off topic here but Ted: the Bonbright 610 you speak of - isn't that a hard chrome bore? (I ask because your post seems to differentiate it from the "chrome bore 610"). Or did you have the Bonbright nikasiled? Does the Bonbright 610 have the same mods as his Vintage 820s?
Andy Symons

Gene Luzader
Posts: 62
Joined: Fri Jun 15, 2007 6:04 pm
Vintage Karting items owned: 1963 Simplex Challenger Twin West Bend 820's
User Agreement: Yes
Location: Monroeville, PA

Re: WTB GAS carbs

Post by Gene Luzader » Wed Feb 08, 2012 3:09 pm

Ted
In my 610/820 Service Manual dated 6/81 West Bend list the following
H L numbered carbs that they used. 130A-189B-134A-232B-122A-173A
and 320A depending on what model your dealing with.
Gene Luzader

ted johnson
Posts: 1546
Joined: Fri Jun 15, 2007 7:59 am

Re: WTB GAS carbs

Post by ted johnson » Wed Feb 08, 2012 3:46 pm

Thanks, Gene. I knew that 820's came with a whole gaggle of Tillotsons. The 232 seems to be a really good carb for gas.
Andy, the chrome bore block I have is not one of U.S. Motor Power's current 610's. It's one of a pair of experimental engines that U.S. Marine was playing with a number of years ago. The engine I'm sending to Dave Bonbright to have the "magic" done is a N.O.S. Dave Libberton 9-port 610 steel bore that was built in the early seventies to compete with the 91's in stock reed class. I don't think they were ever homolugated. Between myself and my Buddy, Charlie, we had three of these. Charlie has one on his '61 Bug Scorpion, and it runs very well. I sold one to a gentleman in Florida, and this is the third one. This is also my third Bonbright 610. His 610 mods mimic his 820 mods. The first two ran great, and I'm sure this 'un will do just as well. Ted

DAN HELDRETH
Posts: 18
Joined: Mon Aug 03, 2009 10:08 am
Vintage Karting items owned: 1961 SIMPLEX CHALENGER RACER MARK 16
TWIN 580 5 PORT WB
User Agreement: Yes
Location: RANDOLPH, OHIO

Re: WTB GAS carbs

Post by DAN HELDRETH » Sat Feb 18, 2012 9:22 am

Ted,
I have a HL283A that found in my stuff. I think that it is a gas carb because my father in-law did not run any alcohol. It looks in good shape just a bit dirty everything moves freely. Give me a call, I don't get on very often
This is the best way to get in contact with me.

Dan Heldreth
330-325-9369

Post Reply