Page 1 of 1
.010 power products ah58 piston and rings ..
Posted: Tue Jan 10, 2012 10:22 pm
by steve miller
hello all., im looking for a 10 over piston and rings for ah58 .dunno if there common, uncommon.extinct.or ever existed.?? any info would be great .. thanks ..
Re: .010 power products ah58 piston and rings ..
Posted: Mon Feb 20, 2012 3:04 am
by Chris Hamm
Bucket from an AH61 will also fit. Only difference between 58 and 61 was a stroker crank.
Re: .010 power products ah58 piston and rings ..
Posted: Mon Feb 20, 2012 9:04 am
by ted johnson
Steve, Hank Rotroff is the PP guru. PM me and I'll give you his contact info. Ted
Re: .010 power products ah58 piston and rings ..
Posted: Mon Feb 20, 2012 7:48 pm
by Rob Voska
Does anyone every look under "parts and resourses" at the top of the page? There is a whole list of suppliers.
Re: .010 power products ah58 piston and rings ..
Posted: Mon Feb 20, 2012 9:52 pm
by Brian Thomas
What I think you are going to find is anyone that has an OS piston is most likely going to hang on to it .There are just not that many around .
To the best of my knowledge there were no OS Tecumseh OE pistons In the 58/61 series or the 81/82 series. A few years back I tried to drum up some interest in a run of 100 OS thin ring pistons for the 58/61 series . There was not enough interest at the kind of money it would have cost per piston .
Brian