rearenginekarts.com

Title says it all. Lemme know what you have.
For a runner, they need not be show quality.
I would like at least 2 - 1.5" and 2 - 1".
Will take a spare or two of either size additionally,if available.
I suppose 4 - 1.5" will work if nothing else is available.

Thank you!!

-jb.

Hello Jesse,

Do you have 6" diameter rim halves that are 1" and 1.5" deep?

The only size I have seen are 2" deep in the six inch diameter. I had a pair of rears last year, all four halves being 2" deep. I bought a kart a month ago with 6" diameter series 24 on the rear and they are 2" deep on all four halves.

Would you want these four 2" rim halves? Do you need the center rear hubs too?

Kind Regards, Joe

Hey Joe. I thought I heard that they made smaller, maybe not. We run a 3.5" max width tire and I use 2 - 1.5" + hub for a total of 4" wide, and that is pushin' it. Just trying to gain a tad of rear sprocket clearance. I guess I'll just put the 'wagon wheels' on for gettin' dirty, and leave the pretties for lookin' pretty.

I'm still hunting for 1" and/or 1.5", if they indeed exist.

Thanks Joe,

-jb.

a friend of mine has some one inch halves in six inch diameter. Terry