Hi Guys-
I'm looking for a set of 58699A rings for Mc-70 std or the 58353 rings for same size bore Mac chainsaw. thanks much!
Need Mac rings Mc-70 std.
Moderator: Rob Voska
Forum rules
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
- Rick Chapman
- Posts: 267
- Joined: Sun Jan 27, 2008 11:46 am
- Vintage Karting items owned: 1961 Bantam B-Bomb, 77' Hornet Enduro, 79' Hornet Wishbone Sprint, 1962 Blitz F-1000
- User Agreement: Yes
- Location: Wadsworth, Ohio 44281
Re: Need Mac rings Mc-70 std.
Jacob..
I used stock bore 101AA rings and cut them down.
I left .065" gap
My engine runs Super, lots of bottom end and mid range.
And the compression is really great.
If you can not find any, this is a fix.
Good Luck
Rick
I used stock bore 101AA rings and cut them down.
I left .065" gap
My engine runs Super, lots of bottom end and mid range.
And the compression is really great.
If you can not find any, this is a fix.
Good Luck
Rick
I Never Thought I'd Be Vintage !!