Page 1 of 1
Xterminator 6 " Hands wheels
Posted: Mon Jan 25, 2010 8:58 pm
by Chris Marchand
Looking for a set of 6 " rear (Hands) wheels for an Xterminator restoration. Thx Chris
Re: Xterminator 6 " Hands wheels
Posted: Tue Jan 26, 2010 3:30 pm
by CarlBuchanan
Chris,
Have you tried Ron Cubel at
rcubel@hotmail.com ?
Re: Xterminator 6 " Hands wheels
Posted: Tue Jan 26, 2010 6:08 pm
by mark l shepard
Hi
There are some on ebay now # 260540658118. the 6" rears have some chips out of them.
hope this helps you
Mark
Re: Xterminator 6 " Hands wheels
Posted: Tue Jan 26, 2010 8:31 pm
by Chris Marchand
Thx Mark, I saw those but wasn t sure if the damage can be repaired to a reasonable condition. These are going to go on a driver rather than a show Xterm so I need some that will not break again. Chris
Re: Xterminator 6 " Hands wheels
Posted: Wed Jan 27, 2010 11:52 am
by ted johnson
Once again, Chris. As Carl said, if you need to talk Xterminator, you need Ron Cubel. His Xterminator site is:
http://www.xterminatorkart.com. Call him at: 520 466-0781
Re: Xterminator 6 " Hands wheels
Posted: Wed Jan 27, 2010 6:30 pm
by Chris Marchand
Talked to Ron, Thx all