Page 1 of 1
Mac engine acc needed....
Posted: Sun Nov 15, 2009 8:22 pm
by Gary Wlodarsky
I couldn't find this at my local hardware store...maybe you can help.... ????
2 aluminum 45 degree motor mounts(might settle for base and side mounts)
2 gem box type mufflers
2 chain guards
2 Max Torque cluthces(or comparable)
Thanks in advance
Gary W
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 9:50 am
by Bill Johnson
Try the Fedco Hardware store. They have what you need. Ed Sahagian
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 6:39 pm
by Tom Smith
Contact Max-Torque about clutches and specify which hand thread if it's for a Mcculloch, if inboard or outboard style, and the number of sprocket teeth.
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 6:53 pm
by Gary Wlodarsky
Bill,,
I checked on Google and the yellow pages...couldn'r find one....????
Everbody needs a little A**...but no body needs a smart A**
thanks
Gary
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 6:55 pm
by Gary Wlodarsky
Tom Smith wrote:Contact Max-Torque about clutches and specify which hand thread if it's for a Mcculloch, if inboard or outboard style, and the number of sprocket teeth.
duh guess maybe I shoulda said for Macs......any contac info????
thanks
Gary
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 9:15 pm
by louie figone
Gary-
Max torque, 630-369-9600,
http://www.maxtorque.com
Vince Hughes is making the GEM chain guard and Reed box mufflers for the McCulloch's. 760-721-6400,
jackshaftjones@cox.net, his website is
http://www.geocities.com/classickartshop
Louie
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 9:20 pm
by Gary Wlodarsky
Bill Johnson wrote:Try the Fedco Hardware store. They have what you need. Ed Sahagian
thanks for the e mail info,,,aorry bout that..LMAO...
Gary
Re: Mac engine acc needed....
Posted: Tue Nov 17, 2009 9:23 pm
by Gary Wlodarsky
thanks much I spoke with Vince a couple a day s ago...will contact MaxTorque,,,,
thanks again
Gary
Re: Mac engine acc needed....
Posted: Sun Nov 22, 2009 10:16 am
by Gary Wlodarsky
Bill Johnson wrote:Try the Fedco Hardware store. They have what you need. Ed Sahagian
Thanks , sure I wish I had a Fedco hardware stiore in my back yard .....
thanks ..got clutches from him...
Gary