rearenginekarts.com

Posted: **Mon Jul 21, 2008 5:51 pm**

On the Westbend 820 can you fit an inboard clutch ?

Mc Bob

Posted: **Mon Jul 21, 2008 8:33 pm**

What style output shaft?

Posted: **Mon Jul 21, 2008 10:08 pm**

philrock wrote:What style output shaft?

It has a straight shaft which is stepped for the thread and has a keyway to lock the clutch.

Mc Bob.

Posted: **Tue Jul 22, 2008 11:35 am**

If you had the crankshaft with the Mac taper on the pto side you could use a regular inboard mac kart clutch. Maybe you can swap out the crank for the new mac taper one.

Posted: **Tue Jul 22, 2008 5:46 pm**

Would this clutch pictured use the tapered clutch or a keyed one ?
This one appears to be retained by a circlip ?

McBob.

Posted: **Tue Jul 22, 2008 6:11 pm**

Bob-

I don't think you can tell if a clutch is for a tapered shaft or not by looking at the clutch drum. Need shots of the clutch hub to see if it's tapered or not... unless you have x-ray vision!

Dean

Posted: **Tue Jul 22, 2008 7:13 pm**

Sorry Dean i tryied to post a larger pic from photobucket but the forum wouldn't accept it as the pic was too big .............

Looks as if i wish to do do the project i have in mind i will need the tapered crank ......

Mc Bob.

Posted: **Tue Jul 22, 2008 10:36 pm**

Anyone got a good 820 crank with a tapered shaft to suit a Mac Clutch ??

Mc Bob.

Posted: **Wed Jul 23, 2008 12:42 am**

Mc Bob-

Dave Bonbright is your guy on those cranks.

Dean

Posted: **Wed Jul 23, 2008 2:54 am**

Yep haven't long ago emailed him regards this crank.

Mc Bob.

rearenginekarts.com

Westbend clutches

Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches

Re: Westbend clutches