Page 1 of 1
Three and a half inch clutch
Posted: Tue Jul 31, 2007 9:57 am
by Dave Brillhart
Looking for a dry clutch to fit a Clinton with a Palmini exhaust, the 4 inch Comet that I have is too large in ID. Modern replacement preferrred, any ideas? Thanks, Dave
Re: Three and a half inch clutch
Posted: Tue Jul 31, 2007 7:49 pm
by Rob Voska
Should be a 5/8" straight shaft. You can bore a Horstman mac clutch to size, rekey it and make spacers to take up the end play, or look for NOS clutches. Have you tried COMET Insustries? Not Comet kart Sales but the clutch manufacturer. They have a great web site. maght take some work but should not be to bad.
Re: Three and a half inch clutch
Posted: Wed Aug 01, 2007 9:00 am
by Dave Brillhart
Thanks for everyones help, comet lists a 350 sereies, that might work. Dave