Three and a half inch clutch

Post all your vintage karting messages here in the General Discussion Forum

Moderator: Rob Voska

Post Reply
Dave Brillhart
Posts: 18
Joined: Fri Jun 15, 2007 8:41 am

Three and a half inch clutch

Post by Dave Brillhart » Tue Jul 31, 2007 9:57 am

Looking for a dry clutch to fit a Clinton with a Palmini exhaust, the 4 inch Comet that I have is too large in ID. Modern replacement preferrred, any ideas? Thanks, Dave

Rob Voska
Posts: 1646
Joined: Fri Jun 15, 2007 9:04 am

Re: Three and a half inch clutch

Post by Rob Voska » Tue Jul 31, 2007 7:49 pm

Should be a 5/8" straight shaft. You can bore a Horstman mac clutch to size, rekey it and make spacers to take up the end play, or look for NOS clutches. Have you tried COMET Insustries? Not Comet kart Sales but the clutch manufacturer. They have a great web site. maght take some work but should not be to bad.

Dave Brillhart
Posts: 18
Joined: Fri Jun 15, 2007 8:41 am

Re: Three and a half inch clutch

Post by Dave Brillhart » Wed Aug 01, 2007 9:00 am

Thanks for everyones help, comet lists a 350 sereies, that might work. Dave

Post Reply