Page 1 of 1

Looking to I D some engine parts

Posted: Wed Sep 16, 2020 8:45 pm
by Mark Loraine
Looking to I D, 2 head and an intake adapter plate, any one know what these are?
Thanks,
Mark L./SWNY

Re: Looking to I D some engine parts

Posted: Wed Sep 16, 2020 8:47 pm
by Mark Loraine
Need to I D these parts, anyone up for positive identification.

Re: Looking to I D some engine parts

Posted: Wed Sep 16, 2020 8:55 pm
by Rob Voska
Reed engineering head is for a Power Products.

Other head hard to tell. Modified to fit on a McCulloch or is it a 100CC BM head?

Re: Looking to I D some engine parts

Posted: Fri Sep 18, 2020 2:42 pm
by Mark Loraine
Thank you for your response;

The BM heads use an 8mm stud to mount head, these holes are either ¼” or for 6mm.(.260”)
Also the overall width of this head is 4 & 7/8” diameter, smaller than the BM heads.
The spark plug hole looks like it’s for long reach B9ES or N-2.
Top of the plughole to the deck is 1.300”.
CTC mount holes are 1.313” approx.
Holes do not line up with McCulloch.
Weighs 1-pound 1.55ozs
99 % sure this is kart related due to the location it came from.

Mark

Re: Looking to I D some engine parts

Posted: Fri Jan 01, 2021 10:25 am
by Mark Loraine
still hoping to I D the head in the top left, hopefully the specs I gave on it will help tell what engine used this.
thanks and Happy New Year.
Regards,
Mark L./SWNY