Clinton A400 Issues

Post all your vintage karting messages here in the General Discussion Forum

Moderator: Rob Voska

Terry Sullivan
Posts: 240
Joined: Sun Aug 12, 2007 9:36 am
Vintage Karting items owned: 4 Bugs, including the Wasp bought by my Dad in 1959. Many Clintons and a few Macs
User Agreement: Yes
Location: Cumming, GA

Re: Clinton A400 Issues

Post by Terry Sullivan » Mon Dec 24, 2018 3:17 pm

A400 uses bronze bushing bearings everywhere.
The A490 has a ball bearing on the PTO side of the crank. A few special models could have a needle bearing on the flywheel side.
Most Clinton chainsaws have ball bearings on the PTO, needles on the flywheel side and needles on the big end of the rod.

Post Reply