Finally got around to restoring the old Tech Articles that were on the original REAR website
http://rearenginekarts.com/?cat=6
Enjoy again, or for the first time. Note there is now an "Articles" link in the main menu, top of page on main site. http://rearenginekarts.com
They are BACK .. Tech Articles
Moderator: Rob Voska
- Jeff Campbell
- Site Admin
- Posts: 580
- Joined: Tue Jun 12, 2007 7:52 pm
- Vintage Karting items owned: 1961 Fox Go-Boy MC20's
Robron Chaparral dual MC101
Margay Cheetah MKIII - Location: West Bloomfield, MI
- Contact:
-
- Posts: 1685
- Joined: Fri Jun 15, 2007 7:59 am
Re: They are BACK .. Tech Articles
On the adaptation of HR carb to Mac manifold, if you're like me and have no desire to cut the little sleeves that must go the 1/4" Mac studs, McMaster Carr has little Oilite bronze bushings at 43 cents apiece. Part No. 2868T42 I did mine this way. Much easier, no finding the right size tubing, no cutting a 1/4" long piece off of it! Ted
-
- Posts: 124
- Joined: Fri May 08, 2009 10:51 pm
- Vintage Karting items owned: ProX 77,McC R1,Bug Stinger Dual.
- User Agreement: Yes
- Location: SWNY14755
Re: They are BACK .. Tech Articles
Thanks for re forming the articles Jeff, is the duckbill test available? It was an in depth test article that you did and would still have value in that category.
Re: They are BACK .. Tech Articles
Jeff,
Thanks for restoring the tech articles. May want to include these also.
viewtopic.php?f=1&t=3999
viewtopic.php?f=1&t=3793
viewtopic.php?f=1&t=3912
viewtopic.php?f=1&t=3915
viewtopic.php?f=1&t=3785
R.E.A.R.
Thanks for restoring the tech articles. May want to include these also.
viewtopic.php?f=1&t=3999
viewtopic.php?f=1&t=3793
viewtopic.php?f=1&t=3912
viewtopic.php?f=1&t=3915
viewtopic.php?f=1&t=3785
R.E.A.R.
-
- Posts: 66
- Joined: Tue Apr 08, 2008 1:11 pm
- Location: pt charlotte fl
hr carbs
on the adaption, we went to ace hardware, obtained oversized studs, drilled-retappped manifold. played with gasket hole opennings. for us, just to be easier and simple to work with. carb openning already there