Page 1 of 1
They are BACK .. Tech Articles
Posted: Sat Aug 26, 2017 2:29 pm
by Jeff Campbell
Finally got around to restoring the old Tech Articles that were on the original REAR website
http://rearenginekarts.com/?cat=6
Enjoy again, or for the first time. Note there is now an "Articles" link in the main menu, top of page on main site.
http://rearenginekarts.com
Re: They are BACK .. Tech Articles
Posted: Sat Aug 26, 2017 4:39 pm
by ted johnson
On the adaptation of HR carb to Mac manifold, if you're like me and have no desire to cut the little sleeves that must go the 1/4" Mac studs, McMaster Carr has little Oilite bronze bushings at 43 cents apiece. Part No. 2868T42 I did mine this way. Much easier, no finding the right size tubing, no cutting a 1/4" long piece off of it! Ted
Re: They are BACK .. Tech Articles
Posted: Sun Aug 27, 2017 8:06 am
by Mark Loraine
Thanks for re forming the articles Jeff, is the duckbill test available? It was an in depth test article that you did and would still have value in that category.
Re: They are BACK .. Tech Articles
Posted: Sun Aug 27, 2017 9:15 am
by REAR
hr carbs
Posted: Sun Sep 03, 2017 2:46 pm
by Butch Kavanagh
on the adaption, we went to ace hardware, obtained oversized studs, drilled-retappped manifold. played with gasket hole opennings. for us, just to be easier and simple to work with. carb openning already there