They are BACK .. Tech Articles

Post all your vintage karting messages here in the General Discussion Forum

Moderator: Rob Voska

Post Reply
User avatar
Jeff Campbell
Site Admin
Posts: 581
Joined: Tue Jun 12, 2007 7:52 pm
Vintage Karting items owned: 1961 Fox Go-Boy MC20's
Robron Chaparral dual MC101
Margay Cheetah MKIII
Location: West Bloomfield, MI

They are BACK .. Tech Articles

Post by Jeff Campbell » Sat Aug 26, 2017 2:29 pm

Finally got around to restoring the old Tech Articles that were on the original REAR website

Enjoy again, or for the first time. Note there is now an "Articles" link in the main menu, top of page on main site.

ted johnson
Posts: 1348
Joined: Fri Jun 15, 2007 7:59 am

Re: They are BACK .. Tech Articles

Post by ted johnson » Sat Aug 26, 2017 4:39 pm

On the adaptation of HR carb to Mac manifold, if you're like me and have no desire to cut the little sleeves that must go the 1/4" Mac studs, McMaster Carr has little Oilite bronze bushings at 43 cents apiece. Part No. 2868T42 I did mine this way. Much easier, no finding the right size tubing, no cutting a 1/4" long piece off of it! Ted

Mark Loraine
Posts: 39
Joined: Fri May 08, 2009 10:51 pm
Vintage Karting items owned: Margay80's+ ProX 77+Mark II MC93,KavallaK40,McC R1,Bug Stinger Dual.
User Agreement: Yes
Location: SWNY14755

Re: They are BACK .. Tech Articles

Post by Mark Loraine » Sun Aug 27, 2017 8:06 am

Thanks for re forming the articles Jeff, is the duckbill test available? It was an in depth test article that you did and would still have value in that category.

Posts: 686
Joined: Sat Jun 16, 2007 10:19 am

Re: They are BACK .. Tech Articles

Post by REAR » Sun Aug 27, 2017 9:15 am


Thanks for restoring the tech articles. May want to include these also.







Butch Kavanagh
Posts: 66
Joined: Tue Apr 08, 2008 1:11 pm
Location: pt charlotte fl

hr carbs

Post by Butch Kavanagh » Sun Sep 03, 2017 2:46 pm

on the adaption, we went to ace hardware, obtained oversized studs, drilled-retappped manifold. played with gasket hole opennings. for us, just to be easier and simple to work with. carb openning already there

Post Reply