Page 1 of 1
West Bend Crankshaft help
Posted: Tue Apr 12, 2016 7:46 pm
by Rob Voska
Got a call about a West Bend crankshaft & I can't find the answer. He has an 820 with a 3/4" straight crank with keyway. The question is are the internal threads at the end of the crank Right Hand or Left Hand? 5/16 or 3/8? Fine or course?
Re: West Bend Crankshaft help
Posted: Tue Apr 12, 2016 9:34 pm
by Gene Luzader
Rob
There are TWO cranks with 3/4 inch shafts with the same part no.(256018)
The one for MODEL NO.82023 and 82027 has 5/16-24 RH threads. The one
for MODEL NO. 82026 has 5/16-24 LH threads. I hope that helps.
Gene Luzader
412-824-8234
Re: West Bend Crankshaft help
Posted: Wed Apr 13, 2016 7:11 am
by Gene Luzader
Rob
One other thing. MODEL No. 82026 is a CW rotation and MODEL Nos.
82023 and 82027 are CCW rotation facing the PTO.
Gene
Re: West Bend Crankshaft help
Posted: Wed Apr 13, 2016 7:46 am
by Rob Voska
Thanks Gene!
Re: West Bend Crankshaft help
Posted: Wed Apr 13, 2016 12:34 pm
by stan wauthier
Rob,
I didn't find a number on the crank, but both of the ones I have are for CW rotation and have 5/16-24 LH threads.