Page 1 of 1
Need stamped motor mounts for Margay gear box
Posted: Mon Mar 14, 2016 8:25 am
by stan wauthier
Joel wants to set his kart up with a Margay gearbox and dual WB820's. He will be using Max-Torque clutches. He has the gearbox but he needs the motor mounts.
Does anyone have them stashed away? He could purchase them or... if we could get the dimensions, I'm willing to re-pop them.
Any help would be appreciated.
Re: Need stamped motor mounts for Margay gear box
Posted: Tue Mar 15, 2016 5:42 am
by REAR
Stan,
Have you tried Margay direct ? Heard a while ago they have some gearbox parts still available.
R.E.A.R.
Re: Need stamped motor mounts for Margay gear box
Posted: Fri Mar 18, 2016 8:17 am
by stan wauthier
No, we hadn't thought of that. Thanks.
Nothing like missing the obvious.
Re: Need stamped motor mounts for Margay gear box
Posted: Fri Mar 18, 2016 5:58 pm
by stan wauthier
I checked with margay today. They don't have any motor mounts, but they may still have the drawings. We're holding our breath.
Joel says there's one on ebay now- we're watching it.
Stan
Re: Need stamped motor mounts for Margay gear box
Posted: Fri Mar 18, 2016 11:05 pm
by Rob Voska
I find it funny when someone asks for something on a forum shortly after it pops up on ebay........
Re: Need stamped motor mounts for Margay gear box
Posted: Sat Mar 19, 2016 9:04 am
by ted johnson
Stan, Charlie was running the Libberton on the Scorp, but has switched to the 101D. I don't know if he'd be willing to sell the WB open spider mount he was using, but you could check with him. Email me or PM if you don't have Charlie's contact. Email's better if you have my address. Ted
Re: Need stamped motor mounts for Margay gear box
Posted: Sun Mar 20, 2016 3:43 pm
by Dick Teal
Jack Murray had a few of the WB mounts; call him to see how much. I made some of mine from old Mac mounts. Look at the Mac mounts and it will become obvious on how to do the work if you have a good fabricator and welder.
Dick Teal