Wanted - Mikuni Carb Parts and 5" Turbine

[Charles Veres]

I am looking for:

Mikuni rebuild kit and mixture needle and spring will post the numbers in a bit. Are the 2 on the carburetor the same? Or an appropriate carb for a stock gas 101
5" rupp turbine outer steel wheel half
Clutch and mount for a 101 Mac
Swing mount
Grand prix seat upholstery
front axel tube and rear bumper tube - 64 rupp grand prix

[ted johnson]

Charles, for the Rupp parts, have you asked Robert Stanton of Robron? He makes most of the stuff new for old Darts. Try Kelly West for Mikuni pieces. I don't have Kelly's contact info. He'll be a member at www.vintagekarts.com and you can locate him that way.

Rupp Karts - ROBRON Inc. - Complete karts and parts - Home of the "Rupp Karts"
ROBRON, Inc. is the maker of the Rupp Dart Karts using the original tooling. ROBRON is the Rupp parts supplier for original parts for restoration. Robron Chaparral upholstery with 1" pleat.
Robert Stanton
800-624-7383
mailto:robroninc@bellsouth.net

Good luck. Ted

[REAR]

Charles,

Try EC for carb parts and info. http://eccarburetors.com/store/en/

If you want Rupp upholstery and even some Rupp frame components try Mike Schlager. His stuff is the best, hands down.
Sent you a PM with contact info for Mike.

Contact Jim Donovan at Max Torque for your clutch needs. 630=369=9600.

Ebay for wheel and mount needs.

Remember, THE BIG ONE is also the the biggest swap meet for all things from the early days of Karting.

Hope this helps

R.E.A.R.

[Paul Booth]

Charles,
I should have the 34mm Mikuni carb parts you need, if you haven't found them yet.
Paul Booth
lindab@casscomm.com
217-323-1750