Page 1 of 1
Mac 10 clone questions
Posted: Mon Jan 27, 2014 11:04 pm
by travis stevens
I know that the d44 saw motor is used for a Mac 10 clone but the bore is to small is there another saw that would have a piston and some more internal parts . ?
Re: Mac 10 clone questions
Posted: Tue Jan 28, 2014 5:53 am
by Brian Thomas
Talk to Dave Luciani over on the vintage kart site , he can help you out .
Re: Mac 10 clone questions
Posted: Tue Jan 28, 2014 11:53 am
by Russ Smith
Mc 10 clones I've seen used a combination of D44 or D44A (larger displacement) in conjunction with 1-70 parts.
Re: Mac 10 clone questions
Posted: Tue Jan 28, 2014 11:55 am
by ken moss
Re: Mac 10 clone questions
Posted: Tue Jan 28, 2014 6:38 pm
by david a luciani
Actually it's the s44a,s55a or mc 1-70 mc1-80 powerhead.
the d44 is good for all the external parts useless as an actual mc10.
the bore and stroke are wrong and the con rod is undersized carrying only 22 conn rod main bearings.
hope this helps.
dave
Re: Mac 10 clone questions
Posted: Thu Jan 30, 2014 9:29 am
by travis stevens
Very helpfully thank you!