Page 1 of 1
Carb for WB700
Posted: Tue Nov 15, 2011 8:54 pm
by Scott Grundfor
What would be an appropriate carb for a WB700 (late chrysler engine). It has a go power stuffer/pyramid reed intake. I have a tillotson HL314 double pumper with 1" bore. Would that be an alky carb? I also have a Mac flat back. A small engine repair book I have lists the WB70023 as 7.5 h p? I don't think that can be right?
Re: Carb for WB700
Posted: Tue Nov 15, 2011 11:00 pm
by Rob Voska
314 is a alky carb.
Re: Carb for WB700
Posted: Tue Nov 15, 2011 11:36 pm
by Tom Smith
West Bend advertised the 700 V5 (5 port) at 7.5 HP and the 580 V5 (5 port) at 6.5 HP. The performance data was established in accordance with the S.A.E. small air-cooled engine test code without air cleaners or mufflers. Here are the published dyno charts for the 700 V5. Max torque = 6.5 lb. ft. @ approx. 6600.
Re: Carb for WB700
Posted: Wed Nov 16, 2011 1:10 am
by Scott Grundfor
Thanks for the info...
Re: Carb for WB700
Posted: Wed Nov 16, 2011 5:40 am
by Dominic Salvato
HL88A.............