Page 1 of 1
swap meet buy homelite saw.
Posted: Sun Oct 16, 2011 7:12 pm
by david a luciani
hi i also bought two homelite saws.
sadly one guy left or i couldn't find him so only one got home.
i think it was ted that shaved a homelite chain saw down to a kart motor.
i might like to try , any comments?
dave
Re: swap meet buy homelite saw.
Posted: Sun Oct 16, 2011 9:18 pm
by ted johnson
Hey, Dave. Mine is a XP-1000/XP-1020 combination. Lots and lots of Dremel-ing and sawing to get the side cover/bar mount down to size. The side cover mounts to the saw with several #12-24 screws, but I added (2) 1/4-20 Helicoils. I also built the manifold for the Mikuni from scratch to accept the big Mac reed. Made the head shroud and side mount from scratch also. These engines are 100cc, and have large rectangular ports, but no boost ports. There is no kart clutch that'll fit, so you have to convert the saw clutch. Mine's still laying in the spare bedroom, and I need to get it on a kart! Ted
Re: swap meet buy homelite saw.
Posted: Sun Oct 16, 2011 10:41 pm
by steve miller
gear drive homelites mb4-1 ,mb,mb3,ect. ect ..all same block as kr and kl ...lotta work to machine a chainsaw block ..and then theres no material casted in block to drill holes for pto side mount ..just my opinion ..
Re: swap meet buy homelite saw.
Posted: Mon Oct 17, 2011 11:49 pm
by david a luciani
i'llpot pix when i get done with this theatre run.
looks like a doable job to me but i'm silly tat way.
want it for the old slow historic class so i can kick butt in slo-mo!!!
dave