header and breather
Moderator: Rob Voska
-
- Posts: 64
- Joined: Mon Aug 25, 2008 3:37 pm
- Vintage Karting items owned: Rathman Xterminator
- User Agreement: Yes
header and breather
Hi guys im posting a few pics of my breather and header on my 580 westbend was wondering if anybody could tell me the maker of these. any info would be great thanks.
-
- Posts: 1685
- Joined: Fri Jun 15, 2007 7:59 am
Re: header and breather
The air filter is G.E.M. and the header is Azusa. The exhaust used to have a 6-tube muffler cap held into the two little holes by J-bolts.
-
- Posts: 121
- Joined: Sat Jun 16, 2007 9:39 am
- Vintage Karting items owned: Single/twin 67 Chaparrals
69 A bone/Model J/62 Fox
WB/820s/610s/580V5
PP58/61/82/KL100 - User Agreement: Yes
Re: header and breather
Azusa muffler attachment is called a Power- Flo Muffler and are being reproduced by Vince Hughes.
Louie
Louie
-
- Posts: 88
- Joined: Wed May 12, 2010 8:50 pm
- Vintage Karting items owned: 3 AH58's and 1 MC45
- User Agreement: Yes
Re: header and breather
Kyle- Nice rig! What brand mini is that?
I only run two strokes on my mini, not only to stay true to history, but mainly because they're just so darn fast! That 580 is the same as the motor which was on my first mini, a Go Kart Corp. Once the fork tube was gusseted to the frame tubes, it became a very good machine.
Would you have any extra of those air filters???
bill
I only run two strokes on my mini, not only to stay true to history, but mainly because they're just so darn fast! That 580 is the same as the motor which was on my first mini, a Go Kart Corp. Once the fork tube was gusseted to the frame tubes, it became a very good machine.
Would you have any extra of those air filters???
bill
-
- Posts: 64
- Joined: Mon Aug 25, 2008 3:37 pm
- Vintage Karting items owned: Rathman Xterminator
- User Agreement: Yes
Re: header and breather
Hi Bill
I love the minibike bikes as well as the karts . THat bike is an aggie bike and most of those bikes came with a 5 hp briggs and there where a few that came with 2 cycle on them I dont know what brand . I put my wb 580 on there and it never came off . Bill to anwser your question I do not have any more filters sorry my friend
I love the minibike bikes as well as the karts . THat bike is an aggie bike and most of those bikes came with a 5 hp briggs and there where a few that came with 2 cycle on them I dont know what brand . I put my wb 580 on there and it never came off . Bill to anwser your question I do not have any more filters sorry my friend
-
- Posts: 88
- Joined: Wed May 12, 2010 8:50 pm
- Vintage Karting items owned: 3 AH58's and 1 MC45
- User Agreement: Yes
Re: header and breather
Kyle- what gear ratio do you have there? I've had the best luck running single chain at 7.2 : 1 for all around miniing, or 6.5 : 1 for road racing. This is with a modified AH 58. The only drawback is being forced to stick with the 72 tooth sprocket, fed by 10 or 11 tooth clutches. you can't bank over very far and stay on the mini! I'd like to try a 9 tooth 5/ 8 shaft clutch if there are any, and switch to a 60 tooth wheel sprocket, but hear a 9 tooth is hard on the chain.
bill
bill