Page 1 of 1
mac 92 seals
Posted: Sat Dec 25, 2010 3:43 pm
by Scott Alto
Anyone have the sks seal numbers for the mac 92 crank????
thanks,Scott
Re: mac 92 seals
Posted: Sat Dec 25, 2010 5:12 pm
by Scott Kneisel
SKF Numbers:
Flywheel side - 6763
PTO - 6814
Have fun,
Scott
Re: mac 92 seals
Posted: Thu Jan 06, 2011 7:56 pm
by Scott Alto
thank you Scott
Scott
Re: mac 92 seals
Posted: Fri Jan 07, 2011 3:52 am
by Terry D Bentley
I know this is what a lot of guys are using for the mag seal. I have not purchased any of them yet. But the crank measures 17mm or .669 diameter. The 6763 is for an 11/16 or .688 shaft. Has anyone pressure checked these after running a while to make sure they maintain a good seal? On an old interchange for a Mc 10 crank seal, it actually uses one for a .656 shaft, even tho its the same .669 diameter crank journal.