Anyone have the sks seal numbers for the mac 92 crank????
thanks,Scott
mac 92 seals
Moderator: Rob Voska
-
Scott Alto
- Posts: 15
- Joined: Sat Sep 05, 2009 4:55 pm
- Vintage Karting items owned: Hovey Hawk
Rupp A Bone wide hoop
Rupp A Bone narrow hoop - User Agreement: Yes
-
Scott Kneisel
- Posts: 477
- Joined: Mon Mar 24, 2008 7:48 pm
- Vintage Karting items owned: '63 Rupp Grand Prix, 66 Rupp Chappy, Mc6's, Mc8, Mc10's, Mc20's
Lotsa' other Macs - User Agreement: Yes
- Location: Farmington, NY
Re: mac 92 seals
SKF Numbers:
Flywheel side - 6763
PTO - 6814
Have fun,
Scott
Flywheel side - 6763
PTO - 6814
Have fun,
Scott
-
Scott Alto
- Posts: 15
- Joined: Sat Sep 05, 2009 4:55 pm
- Vintage Karting items owned: Hovey Hawk
Rupp A Bone wide hoop
Rupp A Bone narrow hoop - User Agreement: Yes
Re: mac 92 seals
thank you Scott
Scott
Scott
-
Terry D Bentley
- Posts: 17
- Joined: Sat Dec 18, 2010 11:50 pm
- Vintage Karting items owned: Rupp Kavalla
- User Agreement: Yes
Re: mac 92 seals
I know this is what a lot of guys are using for the mag seal. I have not purchased any of them yet. But the crank measures 17mm or .669 diameter. The 6763 is for an 11/16 or .688 shaft. Has anyone pressure checked these after running a while to make sure they maintain a good seal? On an old interchange for a Mc 10 crank seal, it actually uses one for a .656 shaft, even tho its the same .669 diameter crank journal.