Page 1 of 1
PTO Mac seal
Posted: Fri Dec 24, 2010 3:33 pm
by ted johnson
Is 6763 the SKF (NAPA) seal part number for the PTO crank seal for the Mac 5 thru 9? I had ordered some seals from the local NAPA, but they couldn't get them from Phoenix. Of course, I forgot to write the part No. down! I'd like to use the SKF seal because it has the sealing compound on the steel case. Thanks in advance, and Merry Christmas! Ted
Re: PTO Mac seal
Posted: Fri Dec 24, 2010 4:39 pm
by George Sellon
Ted, I believe the 6763 is for the flywheel side. 7414 is the number I have for the PTO side.
Merry Christmas to you. BTW if you need some snow to get in the spirit I can send you some, fresh stuff too!
Re: PTO Mac seal
Posted: Fri Dec 24, 2010 4:49 pm
by ted johnson
Thanks, Big George! Merry Christmas. I wouldn't mind a snowflake or two, but an inch would shut this place right down!
I got the two seal numbers mixed up. Again.
Ted
Re: PTO Mac seal
Posted: Fri Dec 24, 2010 6:55 pm
by Scott Kneisel
YUP,
7414, I just ordered 4 from McMaster Carr and had them in 2 days for standard shipping. Those guys are fast.
Merry Christmas Ted
Merry Christmas George
Hope your holidays are great!
Re: PTO Mac seal
Posted: Fri Dec 24, 2010 8:56 pm
by ted johnson
Heck, Scott! Never thought of McMaster! Just emailed Ernie Fisher about them. Merry Christmas to you and the family! Ted
Re: PTO Mac seal
Posted: Fri Dec 24, 2010 8:59 pm
by Tom Smith
They come 10 per box from SKF.