Wiseco 9 port westbend 820 piston?

tim mclaughlin · Post by **tim mclaughlin** » Tue Oct 13, 2009 7:09 pm

I have a new in the box Wiseco 820 "9" port piston with rings. My questions are: 1. Where can I get a wristpin for one of these? 2. What is involved in "9" porting of one of these engines and who does it? I am fairly new to these and trying to get parts to get one done so any help would be greatly appreciated.
Thanks,
Tim

ted johnson · Post by **ted johnson** » Wed Oct 14, 2009 9:03 am

Tim, THE West Bend guru is Dave Bonbright. Here's how to get hold of him, but he's hard to catch, so don't give up!
Dave Bonbright
West Bend 610/820 guru
Enginemasters
557 Este-Madera Dr.
Sonoma, CA 95476
P.O. Box 14,
Vineburg, CA 95487
(707)938-8122
powerbee1@aol.com

Dave Brillhart · Post by **Dave Brillhart** » Wed Oct 14, 2009 11:13 am

If memory is correct, these used the shorter 610 wrist pin. Dave does a perfect job on the rear ports.

mcbob · Post by **mcbob** » Wed Oct 14, 2009 3:11 pm

I recall quite some time back seeing on ebay some oversize pistons for the US820 but i thought all 820's were chrome bored were there non chrome bore models ? Did they have steel liners ?

Mc Bob.

tim mclaughlin · Post by **tim mclaughlin** » Wed Oct 14, 2009 4:23 pm

Thanks guys.

Rob Voska · Post by **Rob Voska** » Wed Oct 14, 2009 6:09 pm

Oversized liners.

Wiseco 9 port westbend 820 piston?

Wiseco 9 port westbend 820 piston?

Re: Wiseco 9 port westbend 820 piston?

Re: Wiseco 9 port westbend 820 piston?

Re: Wiseco 9 port westbend 820 piston?

Re: Wiseco 9 port westbend 820 piston?

Re: Wiseco 9 port westbend 820 piston?