Page 1 of 1
Gearing for Bakersfield / dual Mc101s
Posted: Mon May 25, 2009 10:24 am
by philrock
I'll be at the Bakersfield event this coming weekend with my Hartman with dual Mc101s. I have not been on this track before with this setup, and I was hoping to get some suggestions on gearing. I weigh 210 lbs. , I'm running alky, and using 10 tooth DXL clutches.
Re: Gearing for Bakersfield / dual Mc101s
Posted: Mon May 25, 2009 12:10 pm
by Russ Smith
You might have some trouble using those DXL clutches at Bakersfield. Better check first.
Re: Gearing for Bakersfield / dual Mc101s
Posted: Mon May 25, 2009 1:00 pm
by philrock
Mike says DXLs are no problem. Suggestions on gearing would be greatly appreciated.
Re: Gearing for Bakersfield / dual Mc101s
Posted: Tue May 26, 2009 2:37 am
by steveohara
Phil,
Start with something like a 62 on the axle sprockets and you'll be in good shape.
Steve O'Hara