Clark Engine & Ramos Kit - more history at TBO

Post all your vintage karting messages here in the General Discussion Forum

Moderator: Rob Voska

Post Reply
User avatar
Jeff Campbell
Site Admin
Posts: 580
Joined: Tue Jun 12, 2007 7:52 pm
Vintage Karting items owned: 1961 Fox Go-Boy MC20's
Robron Chaparral dual MC101
Margay Cheetah MKIII
Location: West Bloomfield, MI
Contact:

Clark Engine & Ramos Kit - more history at TBO

Post by Jeff Campbell » Tue Sep 04, 2007 10:31 am

Jack and "Torque" continued the Clark history lesson at TBO this year. They managed to come up with one of the early "shotgun" fan cooled models that used the original PowerProducts cylinder. They also brought the optional fan shroud/ignition housing for the later model Clark that was featured in an article on the REAR website following its appearance at last years TBO.

Look for a bunch of Clark engine photos I took about the middle of the page in photo set 1:

http://www.rearenginekarts.com/TBO2007/

Also, along the same idea as the Clark engine, we saw a Ramos PowerProducts conversion kit that Brian Thomas brought to show off (photos below).

The PP engine had some short comings in the crankcase department: breakage, cylinder coming loose, no direct feed of transfers, no easy place to add another carb/reed..... The Clark and Ramos kit sought to solve the short comings.

Jeff
Attachments
IMG_3241-RAMOS-PP-kit.jpg
Click link for Ad copy of Ramos kit
(122.58 KiB) Downloaded 36 times
IMG_3237-RAMOS-PP-kit-320.jpg
Ramos kit
(29.91 KiB) Downloaded 398 times

Post Reply