PTO Mac seal

ted johnson · Post by **ted johnson** » Fri Dec 24, 2010 3:33 pm

Is 6763 the SKF (NAPA) seal part number for the PTO crank seal for the Mac 5 thru 9? I had ordered some seals from the local NAPA, but they couldn't get them from Phoenix. Of course, I forgot to write the part No. down! I'd like to use the SKF seal because it has the sealing compound on the steel case. Thanks in advance, and Merry Christmas! Ted

George Sellon · Post by **George Sellon** » Fri Dec 24, 2010 4:39 pm

Ted, I believe the 6763 is for the flywheel side. 7414 is the number I have for the PTO side.

Merry Christmas to you. BTW if you need some snow to get in the spirit I can send you some, fresh stuff too!

ted johnson · Post by **ted johnson** » Fri Dec 24, 2010 4:49 pm

Thanks, Big George! Merry Christmas. I wouldn't mind a snowflake or two, but an inch would shut this place right down!
I got the two seal numbers mixed up. Again.

Ted

Scott Kneisel · Post by **Scott Kneisel** » Fri Dec 24, 2010 6:55 pm

YUP,
7414, I just ordered 4 from McMaster Carr and had them in 2 days for standard shipping. Those guys are fast.

Merry Christmas Ted
Merry Christmas George

Hope your holidays are great!

ted johnson · Post by **ted johnson** » Fri Dec 24, 2010 8:56 pm

Heck, Scott! Never thought of McMaster! Just emailed Ernie Fisher about them. Merry Christmas to you and the family! Ted

Tom Smith · Post by **Tom Smith** » Fri Dec 24, 2010 8:59 pm

They come 10 per box from SKF.

DSCN2526.JPG: (798.48 KiB) Not downloaded yet

PTO Mac seal

PTO Mac seal

Re: PTO Mac seal

Re: PTO Mac seal

Re: PTO Mac seal

Re: PTO Mac seal

Re: PTO Mac seal