Are these MC-1 parts?

Post all your vintage karting messages here in the General Discussion Forum

Moderator: Rob Voska

Post Reply
Terry Sullivan
Posts: 298
Joined: Sun Aug 12, 2007 9:36 am
Vintage Karting items owned: 4 Bugs, including the Wasp bought by my Dad in 1959. Many Clintons and a few Macs
User Agreement: Yes
Location: Cumming, GA

Are these MC-1 parts?

Post by Terry Sullivan » Thu Nov 17, 2011 10:22 pm

Anybody familiar with MC-1 parts?
This crank has a pin with a .750 diameter and this rod has a .750 ID on the big end.
The rod is aluminum, 2.500 from center to center, just like early Mac rods.
The rod does not appear to take a bearing on the big end.

I'm asking because they came in the box with an MC-1 block and an MC-2 block
crank and rod.jpg
rod and crank
(36.16 KiB) Not downloaded yet
Top
Terry Sullivan
Posts: 298
Joined: Sun Aug 12, 2007 9:36 am
Vintage Karting items owned: 4 Bugs, including the Wasp bought by my Dad in 1959. Many Clintons and a few Macs
User Agreement: Yes
Location: Cumming, GA

Re: Are these MC-1 parts?

Post by Terry Sullivan » Fri Nov 18, 2011 8:38 am

added the picture to the original post
Can anybody verify whether they are for an Mc-1 ?
Top
Post Reply

Return to “General Discussion”