I need a GoPower pyramid reed assembly

Moderator: Rob Voska

Forum rules
Items listed for sale should be appropriate for the audience of this forum - think before you post! Listings will be auto-pruned after 30 days (expired - deleted).
Post Reply
Terry Sullivan
Posts: 299
Joined: Sun Aug 12, 2007 9:36 am
Vintage Karting items owned: 4 Bugs, including the Wasp bought by my Dad in 1959. Many Clintons and a few Macs
User Agreement: Yes
Location: Cumming, GA

I need a GoPower pyramid reed assembly

Post by Terry Sullivan » Sun May 08, 2011 8:33 am

I need a GoPower pyramid reed assembly.
Better yet - a GoPower pyramid reed assembly WITH a manifold for an early McCulloch!

Anybody willing to part with one?

Terry Sullivan
terryas@att.net
678.617.0730
Top
ted johnson
Posts: 1685
Joined: Fri Jun 15, 2007 7:59 am

Re: I need a GoPower pyramid reed assembly

Post by ted johnson » Sun May 08, 2011 12:34 pm

Terry, I have a NOS Go Power 6 petal reed cage here. I think I have new phenolic reeds. You'd need to edge sand the reeds and find or make the little square washers. You're welcome to it for the postage, if you want it. You've treated me well on the Mac plug covers.
I just dug around in my reed stuff and even found the little washers. The G-10 reeds were cut on a high speed vinyl sign cutting router, and the guy managed to cut them all about 1/32 or 1/16 long, so you'll need to carefully sand the tips shorter. Email me if you want the setup. Ted Johnson
Top
Tom Smith
Posts: 388
Joined: Wed Jun 20, 2007 12:23 am
Vintage Karting items owned: 1960/61 Go Kart 800 Konig FA
1961 Max-Torque Special triple
1962 Max-Torque Special dual
User Agreement: Yes
Location: earth

Re: I need a GoPower pyramid reed assembly

Post by Tom Smith » Thu May 12, 2011 2:44 pm

Terry, I have 4 manifolds with cages, 1 is for a 9 ported engine, the other 3 still feed the piston port. I think I may have 6 stepper reeds also. =T=
Top
Post Reply

Return to “For Sale / Wanted to Buy”