McBob,
Have you checked the pop-off pressure on them,
and the falcrum height ?
Many times a little more pop-off pressure, or lower falcrum height will correct an issue like that.

OK, more 820 secrets. Not really illegal, but definitely in the gray area. WKA had a rule that you could not turn down the screws used on the coil, or stator plate, to limit advance. If you run really big point gap, the coil would get out of sync with the flywheel magnets, you have little dwell time...

Butch, About 18 or so years ago when my son was running Jr. Sportsman with an 820, (everyone else was running that little stinking over priced POS 80cc DAP), and had very good results with it. We had to run a really thick head gasket, had to have half the reed cage blocked off, and had a maximum gea...

Are you talking about this auction?: http://cgi.ebay.com/ebaymotors/Vintage-Kart-NOS-2-Original-West-Bend-820-Engines_W0QQitemZ200233537538QQihZ010QQcategoryZ107068QQssPageNameZWDVWQQrdZ1QQcmdZViewItem If so those carbs are the latest HL Tillotsons. Something like HL375s. They have the newer 'consta...

Bob,

I still think you should try one of my little superchargers.....

Bob, If anyone tries to put this into a 100 word post, they probably will be skipping something............. I suggest you pick up a copy of Gordon Jennings 'Two Stroke Tuner's Handbook'. The blow-down time effects power band width (RPM range). But here is a lot more involved than just the actual ti...

Do you want to sell them, or one, if they can be cut apart ?

Have a picture ?

Maybe we should all stop bitching. Yes, there has been problems, but....... There has been time that I have thought about calling up the local scrap yard, and unloading inventory just to spite some of the A wholes I have to deal with on eBay. I have thrown some of it away, and given other stuff to l...

It's not supposed to be..........