.... several years ago I put together this page, just for this type of situation: http://rearenginekarts.com/report%20fraud.htm some of the links are not working now, but you can google the correction agencies, which handle this type of crime. While they might not help get your money back, at least ...

... do check your plug after running the kart to make sure the plug isn't too hot. The B7HS might be too hot a plug, its probably closer to a Champion L82 (which was supplied by the factory as a break-in plug, that they test started the motors with, an L78 was normally included in the bag of stuff w...

the factory stock plug was a Champion L78, if you can't find one look for a cross to another brand/type. I have used the Autolite 411 plug in Macs (that have 1/2" reach heads, remember some older motors have heads that use 3/8" reach plugs), it's a good all around plug for 91 / 101 motors on gas or ...

... in case you didn't notice already.

Photo set 3 was shot by Jeff Troy (thanks!).

http://rearenginekarts.com/

... well that explains why my carb that I thought was stock wouldn't run on gas and why I was using a whole tank full of fuel just cranking the motor over :lol: OK, another mistake, sorry, the image above and on the website pages has been corrected, hopefully it's right now (it only took a few years...

Steve,
Thanks for the reminder on the decimal diameter being wrong, the drill blank #37 was correct.

... there is a page I set up several years ago that has the tech dimensions for the BDC gas carb... if it still meets the specs, it probably has not been modified for Alky and will run gas:

http://rearenginekarts.com/bdc-14.htm

Jeff

... something really cool, one hour of video clips from The Big One !!! The Big One 2007 Video Clips (click here) Thanks to Brian and Dotty Thomas for mailing in a stack of CDs of photos and video. Also, I set up a video page for indexing the video pages on the REAR website - REAR video index page J...

... I finally figured out some of the new features in this message board software that control user permissions, if you were having trouble doing things like changing your user name, attached files/images to posts, sending PMs and Emails ..... give it a try now.

Jeff Campbell

FYI - you can change your user name after joining. Go to upper right corner, and click on USER CONTROL PANEL, pick PROFILE from menu on the left, then pick sub menu EDIT ACCOUNT SETTINGS. Then replace your user name with your real name.

Jeff