My Son is tired of the E65 and wants a Mac now.

I'll need at least 3 MC-10 head gaskets. If nobody has them, I'm going to have some made.


Terry
678.617.0730

Ted, Thanks for the complement! I Don't remember if I told you - the Wasp with the MC-10 was my Dad's. It has been in the family since 1959. It has been raced in the US and Europe, won a Dutch Grand Prix and spent time as a yard kart. My Dad passed away last December, so I finally got to work and re...

Don - That is an E65 replica that I made from a Clinton D35 chainsaw. Only a few parts needed to be changed. Here is a picture of a matched set of E65's I had on display.

Terry

Steve,

I responded on another forum. I'm up for the crank trade.

Terry Sullivan
terryas@att.net
678.617.0730

4 hats for me

Terry

Rob,
I haven't made it to TBO yet, so forgive me if this has been proposed or done.

Would it be possible to do a 'missing man formation' to pay tribute to our fallen comrads?
Something like: get a few karts out and do a couple slow laps with the pole man missing.

Just a thought.

Terry

Dean, I am surprised that no one answered your question. I don't know about the 820, but Mac colors are listed on this site under the Engine section: Suggestions for readily available spray can high temp yellow paint, that are close to McCulloch yellow: - AutoZone DE1642 yellow high temp engine enam...

Kyle, The first thing I would try is to adjust the high speed needle valve screw on the bottom of the carburetor bowl. You may just be running very rich. The basic adjustment is 1 and 1/2 turns open. - Turn the screw in ( righty tighty ) until it stops ( don't force it when it stops ). - Now turn it...

So, how about for a Newly rebuilt Clinton A490? 6.5 to 1? Need to baby it a bit.

Terry

I tried to use my GPS last year and it wanted me to turn off of 36 BEFORE I got to the town of Barnesville.
If you are going south on I-75, exit on Hiway 36 ( Barnesville-Jackson Rd. ) towards Barnesville. Stay on 36 through Barnesville. The track is a few miles down on the left.