Jeff, to add to Ted's comments: Tecumseh built the split crankcase models in two different sizes, horizontal and vertical crankshafts. The BH60 (horizontal) and BV60 (vertical) are 6.0 cu in and the BH69 and BV69 are 6.9 cu in. They are both cross scavanged engines. Tecumseh prefixes indicate the fo...

Greg Gouveia, 805-541-4310, San Luis Obispo, CA. Reproduction Azusa seat back and floor pan tanks. Also reproduction 5 qt. Chilton and the Palmini tanks.

Louie

Bill, Terry Ives has some nice billet drums that are being made by Kermit Buller for the Burco clutches.

Louie

Ted,
youtube.com. Hovey Hawk or Vintage karts at Dixon, there are several short videos of Ernies Hovey/Konig.

Louie

Phil, The A means it is a single cylinder, the H means it is a horizontal crankshaft. It is an AH82. It has a 2.500 bore and a 1.680 stroke = 8.2 cubic inch displacement. What is the type number, it would be on a tag attached to one of the screws holding the crankcase together. What is the diameter ...

Bob, Terry Ives has the large single carb adapter that you need for the V12 manifold. Will Rogers cast and machines them and Ives sells them.

Louie

Terry Ives, 916-201-7707.

Louie

Gary-

Max torque, 630-369-9600, http://www.maxtorque.com
Vince Hughes is making the GEM chain guard and Reed box mufflers for the McCulloch's. 760-721-6400, jackshaftjones@cox.net, his website is http://www.geocities.com/classickartshop

Louie

McBob

I'll send some pictures off to you tomorrow.

Louie

John, look up SMALL ENGINES service manual by INTERTEC. I have the 15th edition. It covers engines of less than 15 cubic inches, covers two and four cycle engines, Mc Culloch, Clinton, Homelite, West Bend (Chrysler) Power Products etc. 26 Manufactures in all. Does not cover any modifications, lots o...