Went thru 3 karts this winter. None were the same side to side but were usually within 3/16". A few years ago I also made a pusher from a piece of tube and threaded rod and some angle. Welded the angle on one end of the tube and threaded rod like a V block. Slid them together with a nut and washer a...

Great find! Looks like a new project.

"allows the engine to rev higher " is wrong. It raises the RPM the engine makes peak power and narrows the power band of the engine. As you raise the exhaust you also reduce the mechanical compression ratio of the engine. If I were you I would study direct drive kart engines. Wide power bands and mo...

Hanson Duncan his contact info is on the parts and resourses page.

Mine has a blue metalflake wheel and CT alloy wheels.

Jeff your open trailer reminds me of an old argument. After everyone went Hollywood and got an enclosed trailer karts stopped sticking out the trunks of cars or a small open trailer's where they generated lots of interest when at a gas station or going down the road. like all thing just another reas...

Good seal on rings also keeps the heat in the piston crown (where it's cooled by the incoming mixture on top and from the underside) and not down the side of the piston heating and expanding the piston and burning off all the oil.

What WAS it is a better question. I stoppd to look at a kart in a yard one day.......I looked at it for a long time before I realized it was a Fox like mine......just so cut up I didn't recognise it.

Please use your real first and last name when registering. If your posts have been deleted you now know why. Please edit your profile. Thank You FYI - you can change your user name after joining. Go to upper right corner, and click on USER CONTROL PANEL, pick PROFILE from menu on the left, then pick...

It also had a plate that bolted to the flywheel puller holes that locked it in to keep it from backing off.