Thanks Louie Great info! I simply reported on what I saw on a new one, understand the 4-5 will work but are just little longer. Here is the link for the 4-4 rivets Louie mentioned. They Call them aluminum rivets, the ones I mentioned on ebay are surely brass and weigh 80 grams or 2.80 oz. for 100. ...

For anyone wanting rivets for the 2 cycle Max Torque clutch shoes, see link below, I wanted to share the listing on eBay I purchased from sometime back. These are the same exact brass rivets used by Max Torque back in the day. I suspect Many of you may have already purchased, but for those that wer...

hey Bob, I recommend a kevlar re-enforced belt for the snowblower, especially if its the auger belt, I was going through them until I switched and it not only lasted but I went 2 years without having to adjust the tension. I saw all those youtube posts of Ohio's storms and you really got hammered, h...

Hoping someone could post the dimensions of the needles used on the Mcculloch upper pro rod needles (22), I had sold one too many and am looking through my loose lot to see if I have enough of the correct size for my SP125C saw engine. Length and diameter in inches to ten thousands please. (.000”) T...

Thank you for your response; The BM heads use an 8mm stud to mount head, these holes are either ¼” or for 6mm.(.260”) Also the overall width of this head is 4 & 7/8” diameter, smaller than the BM heads. The spark plug hole looks like it’s for long reach B9ES or N-2. Top of the plughole to the deck i...

Mails out today, should be there by Halloween!

Thank you Bob.

Need to I D these parts, anyone up for positive identification.

Looking to I D, 2 head and an intake adapter plate, any one know what these are?
Thanks,
Mark L./SWNY