Search found 55 matches
- Mon Oct 13, 2008 10:34 pm
- Forum: General Discussion
- Topic: Need 74 Concept Brakes Photo
- Replies: 1
- Views: 2822
Need 74 Concept Brakes Photo
Can someone send me a snapshot of the rear axle (area of the brakes)? I dissassembled the kart for restoration several months ago. Now, I can't remember how the brake mounts back together. I should have taken a photo of it before I dismantled it. Also, are there factory measurements for centering th...
- Fri Aug 15, 2008 12:56 pm
- Forum: General Discussion
- Topic: Weld Joints On Margay Concept
- Replies: 1
- Views: 2862
Weld Joints On Margay Concept
I'm still in the midst of restoring a 1974 Concept. A couple of questions concerning it's structure: 1) Welds are cracked at the rear horizontal crossmember. I'm guessing, a result of frame flexing at that area? Should extra weld be built up at those two joints to strengthen it? 2) What kind of bush...
- Mon Jul 07, 2008 7:38 am
- Forum: General Discussion
- Topic: 91 Seal Replacement
- Replies: 7
- Views: 6663
Re: 91 Seal Replacement
where do you get the thin wall tube of correct ID size?
- Sat Jul 05, 2008 3:57 pm
- Forum: General Discussion
- Topic: 91 Seal Replacement
- Replies: 7
- Views: 6663
91 Seal Replacement
What's the best method to remove the seal on the flywheel side?
- Sun Jun 29, 2008 8:23 pm
- Forum: General Discussion
- Topic: 91b1 Bolt Torque Specs
- Replies: 1
- Views: 2948
91b1 Bolt Torque Specs
Does someone have the bolt torque specs for a 91b1?
I have the headbolts (80 in/lbs) and rod bolts (100 in/lbs). I need the six housing, intake & exhaust manifold, stuffer, etc. Thanks.
I have the headbolts (80 in/lbs) and rod bolts (100 in/lbs). I need the six housing, intake & exhaust manifold, stuffer, etc. Thanks.
- Mon Jun 16, 2008 9:55 am
- Forum: General Discussion
- Topic: Concept Seat Covers
- Replies: 0
- Views: 2618
Concept Seat Covers
Does anyone make reproduction Margay Concept seat covers? Or, high and low price to have one made using the old worn cover and fiberglass seat?
- Wed May 28, 2008 1:40 pm
- Forum: General Discussion
- Topic: Spark Plug Cover
- Replies: 1
- Views: 2946
Spark Plug Cover
Who sells Mac spark plug covers? Price?
- Mon May 26, 2008 7:46 am
- Forum: General Discussion
- Topic: Mac Rod Offset?
- Replies: 6
- Views: 6660
Re: Mac Rod Offset?
Thanks,
What I'm seeing is the large end housing is not symmetrical (one side has a little more mass), but the opening is centered with the rod shaft.
What I'm seeing is the large end housing is not symmetrical (one side has a little more mass), but the opening is centered with the rod shaft.
- Thu May 22, 2008 6:53 pm
- Forum: General Discussion
- Topic: Mac Rod Offset?
- Replies: 6
- Views: 6660
Mac Rod Offset?
1) The rod bearing opening (big end) looks offset from rod center? Which way does the rod face on the crank?
2) Is the piston (wrist pin opening) offset also? I see no arrows or markings on the piston other than the oversize numbers stamped into the top of it.
Thanks
2) Is the piston (wrist pin opening) offset also? I see no arrows or markings on the piston other than the oversize numbers stamped into the top of it.
Thanks
- Sun May 18, 2008 8:05 pm
- Forum: General Discussion
- Topic: Margay Wheel Bearings
- Replies: 1
- Views: 2702
Margay Wheel Bearings
Are Margay wheel bearings still available?