on the saws you wouldn't happen to have a list of saws with closed ports would you? McBob has a a decent section with which I helped contribute with my 1-50 saw block that has a list of the saw blocks that can be used to recreate the 5 or 6. It lists the number of ports that are open. Hope this hel...

What about an expansion chamber. Im a newer technology enthusist mainly because of the power increase it creates but I know that pipes werent around for near ten years after my kart was produced. Wasnt it common to use older and newer equipment together for the budget minded? Anyways I know the rule...

I am curious about the different dispacement catagories in our modern era racing now and what they were from the beginning to the vintage cutoff. Just a general idea is fine as im looking for engines sometime in my future to put on my hellcat (the saw engine is just too much $$ to get ALL the parts ...

wow zeros across the board, do you think he may be asking to much?

thanks thats what appeared to be correct as after time wires seem to go to there original location from being bent that way for so long. I thought I may have been missing something. THanks

One more thing real quick, does it matter what order the condenser, coil, and insulater are mounted on the post?

Working at putting together the 1-50 engine I have and am very new to points style ignition. Some info would be very helpfull. I should have taken a pic before I took it apart but hindsight is 20 20. Anyways if someone has a pic showing the detail of the various parts and there locations that would ...

Wow thats great info thank you very much. Hey I was going through the WKA website and came across your name in the standings for enduro I beleive?

I was warned of this guy when I first got my hellcat. Was told about the riduculous price he was trying to ask for his hellcat on ebay but it was a pristine kart I guess.

I just got a cheapy set of files from H/F and they are all very small and their are like 10 of them to choose from in different patterns. They arent the hardest materials but for the 5 bucks I paid for the whole set its worth going through a set or two. Also I had asked earlier about using the MC6 c...

Oh one more quick thing, How much should I raise the ex ports before being squared? Now From what ive seen it appears the inside nearest the ribs will get squared off and the outside port edge is left rounded ? From what ive read a round port is much easier on rings than a square port.